How to Clean Your Turntable to Keep It Working Perfectly

While it might not seem like it’s a top priority, cleaning your turntable is very important. That is unless you don’t care about garbled sound. We have all the advice you need right here on how to clean your turntable correctly.

It may sound like a difficult chore, but cleaning a turntable is quite simple. All you need are some supplies, which we will mention below, and to know that you should start with your needle first because it is one of the essential parts of your turntable.

Follow the following Steps to clean your Turntable:

  1. Cleaning the Stylus
  2. Cleaning the surface
  3. Clean the Inside

Just collect the following and proceed:

  • Stylus cleaning brush
  • Soft paintbrush
  • Rubbing alcohol
  • Lint-free cloth
  • Dusting cloth

Cleaning the Stylus

You have to use the stylus cleaning brush to clean the needle of your turntable. There’s a good reason why you must use this particular brush and not another type. That is because it provides the necessary level of precision that allows for cleaning the needle correctly without damaging it. Your record player’s needle is a very fragile thing, and you don’t want to risk breaking it or marring it somehow.

But you’re not safe yet. You still must be sure that you are correctly using the stylus cleaning brush not to damage your turntable needle inadvertently. The needle must be cleaned from back to front using the brush because this is the only way to do it safely. Should you opt to move the brush from front to back or even side to side, it may result in bending the needle.

In case you feel that the stylus hasn’t been thoroughly cleaned using this way, you can use a tiny amount of the rubbing alcohol by dampening the brush in it and running it over the stylus again.

It’s advised that you clean the stylus every time the turntable is used.

Cleaning the surface

Using an anti-static cloth will effectively wipe off any debris or dust from the surface of your turntable.

The anti-static cloth is an essential cleaning tool. This will keep the surface from being charged by your action of wiping. Thus lint and dust particles are kept from being magnetically pulled back right away. Furthermore, there are also vinyl cleaning cloths that are specially protected. These clothes can also remove really old dust from older records and enable you to listen with pleasure to your old classics again.

Once you’re done with the anti-static cloth cleaning, if you think it requires a better cleaning, you can put a little rubbing alcohol on a lint-free cloth and clean the surface again just like you did with the needle.

It usually works because if the surface part has fingerprints and other agents that are more difficult to remove, it will be necessary to clean it with the use of rubbing alcohol. Moreover, while using the rubbing alcohol, be sure that you begin cleaning the center’s surface and gradually move outwards in a circle.

To wind things up, you can again use a dry lint-free cloth to get rid of any other dust or debris that may have gotten left behind on the turntable surface.

Clean the Inside

After you have the turntable effectively cleaned on the outside, try to clean your record player’s inside. If a record player is cleaned from the inside, it will have better sound and last much longer when; this is particularly true if the turntable has a belt drive mechanism.

1. Turn the power off. Don’t take the risk, but ensure that nothing will happen to you when you are doing the actual cleaning.

2. Remove the dust cover and rubber mat. You’ll find that this is easy to lift because it generally is not connected directly to the record player.

3. Remove the turntable platter.

4. Now, the most challenging part is over. The inner workings can be seen. The belt can be carefully removed and treated with a cloth or alcohol.

5. Clean the underside of the platter too. Frequently dust falls down again when screwing them together, so beware.

6. Wait until all parts are entirely dry before you begin reassembling the turntable.

Luckily, you needn’t repeat this internal cleaning process more than one or two times a year. But don’t forget that it also depends on just how often you use the turntable and whether or not you use a dust cover.

Recommendations

As with the stylus, it’s advised to clean your turntable’s surface after every use too. It would be best if you also kept in mind some other essential tips.

  • Never use your fingers to wipe the stylus or surface. This is particularly important in reference to the needle.
  • Never attempt to blow the stylus clean as this is one instance where you can’t take the easy way out.
  • The belt is not everlasting with a belt-drive turntable and can wear down with frequent use if too much dirt accumulates there. That’s why you should do yourself a favor and keep your belt clean by using a basic cleaning cloth and some water or alcohol.
  • If you received a dust cover along with your record player when you purchased it, it’s best if you put it on when the player is not in use.

In general, most people are aware that they need to clean their turntables and records regularly, but what a lot of people fail to understand is that dirt and dust can actually affect the sound a great deal. This can lead to skipping and crackling noises and having the needle get stuck, and when enough time passes, there will almost certainly be damage to the record or needle. So it is imperative that you take action before things reach this point.

Suppose you would like to purchase a new turntable to spend less time taking care of the device; that’s a good idea. Just look for a model that comes with a very durable stylus and a dust cover.